To prepare the LAMP server

1. Connect to your instance.
2. To ensure that all of your software packages are up to date, perform a quick software update on your instance. This process may take a few minutes, but it is important to make sure that you have the latest security updates and bug fixes.

   The -y option installs the updates without asking for confirmation. If you would like to examine the updates before installing, you can omit this option.

   [ec2-user ~]$ sudo yum update -y

3. Install the lamp-mariadb10.2-php7.2 and php7.2 Amazon Linux Extras repositories to get the latest versions of the LAMP MariaDB and PHP packages for Amazon Linux 2.

   [ec2-user ~]$ sudo amazon-linux-extras install -y lamp-mariadb10.2-php7.2 php7.2

   Note

   If you receive an error stating sudo: amazon-linux-extras: command not found, then your instance was not launched with an Amazon Linux 2 AMI (perhaps you are using the Amazon Linux AMI instead). You can view your version of Amazon Linux with the following command.

   cat /etc/system-release

   To set up a LAMP web server on Amazon Linux AMI , see Tutorial: Install a LAMP Web Server with the Amazon Linux AMI.

4. Now that your instance is current, you can install the Apache web server, MariaDB, and PHP software packages.

   Use the yum install command to install multiple software packages and all related dependencies at the same time.

   [ec2-user ~]$ sudo yum install -y httpd mariadb-server

   Note

   You can view the current versions of these packages with the following command:

   yum info package_name

5. Start the Apache web server.

   [ec2-user ~]$ sudo systemctl start httpd

6. Use the systemctl command to configure the Apache web server to start at each system boot.

   [ec2-user ~]$ sudo systemctl enable httpd

   You can verify that httpd is on by running the following command:

   [ec2-user ~]$ sudo systemctl is-enabled httpd

7. Add a security rule to allow inbound HTTP (port 80) connections to your instance if you have not already done so. By default, a launch-wizard-N security group was set up for your instance during initialization. This group contains a single rule to allow SSH connections.
   1. Open the Amazon EC2 console at https://console.aws.amazon.com/ec2/.
   2. Choose Instances and select your instance.
   3. Under Security groups, choose view inbound rules.
   4. You should see the following list of rules in your default security group:

      Security Groups associated with i-1234567890abcdef0
      Ports     Protocol     Source     launch-wizard-N 22 tcp 0.0.0.0/0 ✔

      Using the procedures in Adding rules to a security group, add a new inbound security rule with the following values:

      • Type: HTTP
      • Protocol: TCP
      • Port Range: 80
      • Source: Custom
8. Test your web server. In a web browser, type the public DNS address (or the public IP address) of your instance. If there is no content in /var/www/html, you should see the Apache test page. You can get the public DNS for your instance using the Amazon EC2 console (check the Public DNS column; if this column is hidden, choose Show/Hide Columns (the gear-shaped icon) and choose Public DNS).

   If you are unable to see the Apache test page, check that the security group you are using contains a rule to allow HTTP (port 80) traffic. For information about adding an HTTP rule to your security group, see Adding rules to a security group.

   Important

   If you are not using Amazon Linux, you may also need to configure the firewall on your instance to allow these connections. For more information about how to configure the firewall, see the documentation for your specific distribution.

   

To set file permissions

1. Add your user (in this case, ec2-user) to the apache group.

   [ec2-user ~]$ sudo usermod -a -G apache ec2-user

2. Log out and then log back in again to pick up the new group, and then verify your membership.
   1. Log out (use the exit command or close the terminal window):

      [ec2-user ~]$ exit

   2. To verify your membership in the apache group, reconnect to your instance, and then run the following command:

      [ec2-user ~]$ groups
      ec2-user adm wheel apache systemd-journal

3. Change the group ownership of /var/www and its contents to the apache group.

   [ec2-user ~]$ sudo chown -R ec2-user:apache /var/www

4. To add group write permissions and to set the group ID on future subdirectories, change the directory permissions of /var/www and its subdirectories.

   [ec2-user ~]$ sudo chmod 2775 /var/www && find /var/www -type d -exec sudo chmod 2775 {} ;

5. To add group write permissions, recursively change the file permissions of /var/www and its subdirectories:

   [ec2-user ~]$ find /var/www -type f -exec sudo chmod 0664 {} ;

To test your LAMP server

1. Create a PHP file in the Apache document root.

   [ec2-user ~]$ echo "<?php phpinfo(); ?>" > /var/www/html/phpinfo.php

   If you get a “Permission denied” error when trying to run this command, try logging out and logging back in again to pick up the proper group permissions that you configured in To set file permissions.

2. In a web browser, type the URL of the file that you just created. This URL is the public DNS address of your instance followed by a forward slash and the file name. For example:

   http://my.public.dns.amazonaws.com/phpinfo.php

   You should see the PHP information page:

   
   Note

   If you do not see this page, verify that the /var/www/html/phpinfo.php file was created properly in the previous step. You can also verify that all of the required packages were installed with the following command.

   [ec2-user ~]$ sudo yum list installed httpd mariadb-server php-mysqlnd

   If any of the required packages are not listed in your output, install them with the sudo yum install package command. Also verify that the php7.2 and lamp-mariadb10.2-php7.2 extras are enabled in the output of the amazon-linux-extras command.

3. Delete the phpinfo.php file. Although this can be useful information, it should not be broadcast to the internet for security reasons.

   [ec2-user ~]$ rm /var/www/html/phpinfo.php

To secure the MariaDB server

1. Start the MariaDB server.

   [ec2-user ~]$ sudo systemctl start mariadb

2. Run mysql_secure_installation.

   [ec2-user ~]$ sudo mysql_secure_installation

   1. When prompted, type a password for the root account.
      1. Type the current root password. By default, the root account does not have a password set. Press Enter.
      2. Type Y to set a password, and type a secure password twice. For more information about creating a secure password, see https://identitysafe.norton.com/password-generator/. Make sure to store this password in a safe place.
         Note

         Setting a root password for MariaDB is only the most basic measure for securing your database. When you build or install a database-driven application, you typically create a database service user for that application and avoid using the root account for anything but database administration.

   2. Type Y to remove the anonymous user accounts.
   3. Type Y to disable the remote root login.
   4. Type Y to remove the test database.
   5. Type Y to reload the privilege tables and save your changes.
3. (Optional) If you do not plan to use the MariaDB server right away, stop it. You can restart it when you need it again.

   [ec2-user ~]$ sudo systemctl stop mariadb

4. (Optional) If you want the MariaDB server to start at every boot, type the following command.

   [ec2-user ~]$ sudo systemctl enable mariadb

To install phpMyAdmin

1. Install the required dependencies.

   [ec2-user ~]$ sudo yum install php-mbstring -y

2. Restart Apache.

   [ec2-user ~]$ sudo systemctl restart httpd

3. Restart php-fpm.

   [ec2-user ~]$ sudo systemctl restart php-fpm

4. Navigate to the Apache document root at /var/www/html.

   [ec2-user ~]$ cd /var/www/html

5. Select a source package for the latest phpMyAdmin release from https://www.phpmyadmin.net/downloads. To download the file directly to your instance, copy the link and paste it into a wget command, as in this example:

   [ec2-user html]$ wget https://www.phpmyadmin.net/downloads/phpMyAdmin-latest-all-languages.tar.gz

6. Create a phpMyAdmin folder and extract the package into it with the following command.

   [ec2-user html]$ mkdir phpMyAdmin && tar -xvzf phpMyAdmin-latest-all-languages.tar.gz -C phpMyAdmin --strip-components 1

7. Delete the phpMyAdmin-latest-all-languages.tar.gz tarball.

   [ec2-user html]$ rm phpMyAdmin-latest-all-languages.tar.gz

8. (Optional) If the MySQL server is not running, start it now.

   [ec2-user ~]$ sudo systemctl start mariadb

9. In a web browser, type the URL of your phpMyAdmin installation. This URL is the public DNS address (or the public IP address) of your instance followed by a forward slash and the name of your installation directory. For example:

   http://my.public.dns.amazonaws.com/phpMyAdmin

   You should see the phpMyAdmin login page:

   
10. Log in to your phpMyAdmin installation with the root user name and the MySQL root password you created earlier.

    Your installation must still be configured before you put it into service. To configure phpMyAdmin, you can manually create a configuration file, use the setup console, or combine both approaches.

    For information about using phpMyAdmin, see the phpMyAdmin User Guide.